♡ Lace Products

Skin Protection 

The Scalp Protector is specially formulated to create a protective barrier between your skin and lace adhesive, helping to reduce irritation while improving the performance of your installation. This lightweight formula is suitable for all lace installations and is recommended before applying any adhesive. Each purchase includes one 1.3 oz bottle of Scalp Protector.

Tips:


• Apply to clean skin for maximum protection and adhesion.


• Allow the product to dry completely before applying adhesive.


• Use before every installation to help protect sensitive skin.

Directions: 

1. Clean the skin around your hairline and remove any oils, makeup, or residue.
2. Shake the bottle well before use.
3. Spray one even layer across the hairline and any area where adhesive will be applied.
4. Allow the product to dry for approximately 1 minute.
5. Once fully dry, proceed with your adhesive application and lace installation.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.

Lace Adhesive Tape 

Lace Wig Tape provides a secure, mess-free alternative to traditional liquid adhesives. Designed for quick and easy installations, this double-sided tape delivers a strong hold while maintaining a natural-looking finish. Perfect for beginners and experienced lace wearers alike, Lace Wig Tape helps keep your unit securely in place while allowing for easy removal when needed. 

Tips:


• Apply tape to clean, dry, oil-free skin for the strongest hold.


• Use a scalp protector beforehand if you have oily or sensitive skin.


• Avoid excessive moisture or sweating for the first 30 minutes after installation. 

Directions: 

1. Clean the hairline and surrounding skin to remove oils, makeup, and residue.
2. Apply the tape along the desired area of the hairline or wig perimeter.
3. Press firmly to ensure the tape adheres securely to the skin.
4. Remove the protective backing from the tape.
5. Position the lace and press it firmly into place, then secure with a melting band for 5-10 minutes.

Removal:

1. Apply adhesive remover or 91% alcohol along the taped areas.
2. Allow the product to sit for several minutes to loosen the adhesive.
3. Gently lift the lace away from the tape without pulling.
4. Carefully remove any remaining tape from the skin or lace.
5. Clean the area thoroughly before your next installation.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.

The Melt System

The Melt System is a complete lace installation kit designed to help achieve a seamless, long-lasting melt from start to finish. Whether you're a beginner or an experienced lace wearer, this all-in-one system provides everything needed for a secure install, including 1 Skin Protectant (1.3 oz), 1 Supa Sensitive Bond Waterproof Glue (1.3 oz), and 1 Supa Bond Waterproof Glue (1.3 oz). Each product works together to create a natural-looking hairline with salon-quality results and extended wear. 

Tips:


• Apply all adhesive layers in thin coats for the strongest hold.


• Allow each layer to dry clear and tacky before moving to the next step.


• Use a melt band after installation for a flawless, undetectable finish.

Directions: 

1. Clean the hairline thoroughly and apply a layer of Skin Protectant. Allow it to dry completely.
2. Apply a thin layer of Supa Sensitive Bond Waterproof Glue and allow it to dry until tacky.
3. Apply a thin layer of Supa Bond Waterproof Glue over the prepared area and allow it to become tacky.
4. Carefully place the lace onto the adhesive and press firmly along the hairline.
5. Secure with a melt band for 15-20 minutes, then style as desired.

Removal:

1. Apply adhesive remover or 91% alcohol along the hairline and adhesive areas.
2. Allow the remover to sit for several minutes to break down the adhesive.
3. Gently lift the lace away from the hairline without pulling.
4. Remove any remaining adhesive residue from the skin and lace.
5. Clean the hairline thoroughly before your next installation.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.

Supa Bond Waterproof Adhesive Mini 

Supa Bond Waterproof Adhesive is a professional-grade lace adhesive designed for long-lasting installs and maximum hold. Each purchase includes 1 bottle of a 1.3 oz squeeze-top applicator. This waterproof, sweat-resistant, and humidity-resistant formula is ideal for long-term wear and is especially suitable for active lifestyles, heavy sweaters, and those with oily skin. When applied correctly, Supa Bond can provide a secure hold for up to 2-3 weeks and even longer when paired with other lace products.

Tips:


• Always apply a scalp protectant before using adhesive to help protect the skin.


• Apply thin layers and allow each layer to dry clear before applying the next.
• For extended wear, pair with lace adhesive tape or Supa Sensitive Bond.

Directions: 

1. Clean the hairline thoroughly and remove any oils, makeup, or residue.
2. Apply a layer of scalp protectant and allow it to dry completely.
3. Apply a thin layer of Supa Bond along the hairline and allow it to dry until clear and tacky.
4. Repeat with additional thin layers if desired for maximum hold.
5. Install the lace, press firmly into place, and secure with a melt band for 10-15 minutes.

Removal:

1. Apply 91% alcohol or an adhesive remover along the hairline.
2. Allow the product to sit for several minutes to loosen the adhesive.
3. Gently lift the lace away from the skin without pulling.
4. Remove any remaining adhesive residue from the skin and lace.
5. Clean the area thoroughly before your next installation.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.

Liquid Freeze Spray 

Liquid Freeze Spray is designed to provide a secure, natural-looking hold while enhancing the longevity of your lace installation. Each purchase includes 1 bottle of freeze spray available in a 5 oz size. This moisture-resistant formula creates an invisible bond that helps conceal the hairline for a seamless finish. Suitable for lace fronts, closures, toupees, and wigs, this glueless, latex-free formula delivers a strong hold without leaving behind visible residue. 

Tips:


• Shake well before each use for even product distribution.


• Apply in light layers for a stronger, longer-lasting hold.


• Use a melt band after application to help achieve a flawless finish.

 Directions:

1. Clean the hairline and ensure the area is free of oils, makeup, and residue.
2. Shake the bottle well before use.
3. Hold the spray approximately 1-2 inches away from the hairline.
4. Spray in short, even bursts along the desired area and immediately position the lace.
5. Secure with a melt band for 5-10 minutes before styling as desired.

Removal:

1. Apply 91% alcohol or an adhesive remover along the hairline.
2. Allow the product to sit for several minutes to loosen the bond.
3. Gently lift the lace away from the skin without pulling.
4. Remove any remaining residue from the skin and lace.
5. Clean the area thoroughly before your next installation.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.

Lace Xscape Shampoo 

Lace Xscape Shampoo is a professional-grade adhesive remover shampoo designed to break down and remove leftover glue, tape, and product buildup after lace removal. Each purchase includes one 10 fl oz bottle. This cleansing formula helps lift stubborn adhesive residue from the hairline and lace while preparing your hair and unit for your next installation. 

Tips:


• Focus application on areas with adhesive residue or heavy product buildup.


• For stubborn residue, cover with a plastic cap and allow the product to sit for 10-15 minutes.


• Use after lace removal and before your regular cleansing routine for best results. 

Directions: 

1. Thoroughly wet the hair and areas containing adhesive residue.
2. Apply a small amount of Lace Xscape Shampoo directly to the affected areas.
3. Gently massage and work the product into a rich lather.
4. Allow the shampoo to sit for several minutes to break down adhesive buildup.
5. Rinse thoroughly and repeat as needed until the hair and lace feel clean.

Removal:

1. Remove your lace unit using 91% alcohol or an adhesive remover.
2. Rinse away any loose adhesive residue with warm water.
3. Apply Lace Xscape Shampoo to areas containing leftover glue or tape residue.
4. Massage thoroughly and rinse until all residue has been removed.
5. Follow with your regular shampoo and conditioning routine if desired.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.

Supa Sensitive Bond 

Supa Sensitive Bond Adhesive is a strawberry-scented lace adhesive specially formulated for individuals with sensitive or dry skin. Available in both 1.3 oz and 2 oz sizes, this waterproof, latex-free formula provides an extreme hold of up to 2 weeks with proper application. Designed for short to medium-term wear, Supa Sensitive Bond delivers a secure, natural-looking hold while being gentler on the skin than traditional adhesives. For best results, a scalp protectant is always recommended before application. 

Tips:


• Always apply a scalp protectant before using adhesive to help minimize irritation.


• Apply thin, even layers and allow each layer to dry clear before applying the next.


• Pair with lace adhesive tape for additional reinforcement and longer-lasting wear.

Directions: 

1. Clean the hairline thoroughly and remove any oils, makeup, or residue.
2. Apply a layer of scalp protectant and allow it to dry completely.
3. Apply a thin layer of Supa Sensitive Bond along the hairline and allow it to dry until clear and tacky.
4. Repeat with additional thin layers if desired for added hold.
5. Install the lace, press firmly into place, and secure with a melt band for 10-15 minutes.

Removal:

1. Apply 91% alcohol or an adhesive remover along the hairline.
2. Allow the product to sit for several minutes to break down the adhesive.
3. Gently lift the lace away from the skin without pulling.
4. Remove any remaining adhesive residue from the skin and lace.
5. Clean the area thoroughly before your next installation.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.

Supa Bond Waterproof -5oz

Supa Bond Waterproof Adhesive is a professional-grade lace adhesive formulated for maximum hold and long-lasting wear. Each purchase includes one 5 oz bottle. This latex-free formula is waterproof, sweat-resistant, humidity-resistant, and suitable for oily skin, making it ideal for active lifestyles, workouts, and long-term lace installations. When applied correctly, Supa Bond provides an extreme hold that can last 2-4 weeks while maintaining a secure and natural-looking finish.

 Tips:


• Always apply a scalp protectant before using adhesive to help protect the skin.


• Apply thin layers and allow each layer to dry clear before applying the next.


• Pair with lace adhesive tape or Supa Sensitive Bond for additional reinforcement and longer wear. 

Directions: 

1. Clean the hairline thoroughly and remove any oils, makeup, or residue.
2. Apply a layer of scalp protectant and allow it to dry completely.
3. Apply a thin layer of Supa Bond along the hairline and allow it to dry until clear and tacky.
4. Repeat with additional thin layers as desired for maximum hold.
5. Install the lace, press firmly into place, and secure with a melt band for 10-15 minutes.

Removal:

1. Apply 91% alcohol or an adhesive remover along the hairline.
2. Allow the product to sit for several minutes to break down the adhesive.
3. Gently lift the lace away from the skin without pulling.
4. Remove any remaining adhesive residue from the skin and lace.
5. Clean the area thoroughly before your next installation.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.

Lace Remover 

Fast Acting Lace Remover is an oil-based formula designed to quickly and effectively break down lace adhesive for easy removal. Available in both 1.3 oz and 4 oz sizes, this remover helps dissolve glue buildup while reducing the risk of pulling or damaging your lace. Its fast-acting formula works within minutes, making the removal process quicker, easier, and more comfortable.

Tips:


• Allow the remover to sit for several minutes before lifting the lace.


• Work in small sections to ensure all adhesive is properly dissolved.


• Follow with Lace Xscape Shampoo to remove any remaining residue.

Directions: 

1. Apply the remover directly along the hairline and adhesive areas.
2. Allow the product to sit for 2-5 minutes to break down the adhesive.
3. Gently begin lifting the lace as the bond loosens.
4. Apply additional remover as needed to stubborn areas.
5. Once the lace is fully removed, cleanse the area thoroughly to remove any remaining residue.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.

Glue Bundle 

The Glue Bundle combines two of our best-selling lace adhesives in one convenient package. Each bundle includes 1 Supa Bond Waterproof Adhesive (1.3 oz) and 1 Supa Sensitive Bond Adhesive (1.3 oz), giving you the flexibility to choose the adhesive that best fits your skin type and installation needs. Whether you have oily skin, sensitive skin, or simply want both options on hand, this bundle provides reliable hold, seamless installs, and long-lasting results. 

Tips:


• Use Supa Bond for oily skin, active lifestyles, and extended wear.


• Use Supa Sensitive Bond for sensitive or dry skin and shorter-term installs.


• Always apply a scalp protectant before using any adhesive for best results. 

Directions: 

1. Clean the hairline thoroughly and remove any oils, makeup, or residue.
2. Apply a scalp protectant and allow it to dry completely.
3. Choose the adhesive best suited for your skin type and apply a thin layer along the hairline.
4. Allow the adhesive to dry until clear and tacky before placing the lace.
5. Install the lace, press firmly into place, and secure with a melt band for 10-15 minutes.

Removal:

1. Apply 91% alcohol or an adhesive remover along the hairline.
2. Allow the product to sit for several minutes to break down the adhesive.
3. Gently lift the lace away from the skin without pulling.
4. Remove any remaining adhesive residue from the skin and lace.
5. Clean the area thoroughly before your next installation.

Disclaimer:

• Perform a patch test before full application.

• Discontinue use if irritation occurs.

• Keep out of reach of children.